3D Systems CUBEX Guía de usuario

CubeX 3D printerUser guideTMSee inside for use and safety information.

Your Cubify Invent license code and USB Key can be found in your CubeX toolbox at the base of the CubeX packaging.1. Plug the USB provided with your

10EX-MAP Allows you to re-map your print jets.EX-CON Allows you to manually jet your print jets, giving you control of temperature and RPM.MOVE Manual

11DOWNLOADING CUBEX SOFTWAREGo to Cubify.com/cubex/index.aspx and click the download CubeX software link.INSTALLING CUBEX SOFTWARE1. Go to the direct

Fig. 29 Fig. 30The CubeX software (Fig. 31) is used to create the .cubex les that your CubeX will use to create your parts. The software allows you t

13PICK SHELLS Select which Print Jets print which parts. The available options will vary depending on how many Print Jets you have active and

14POSITIONING MULTIPLE PARTS• Manual positioning: Right click and hold on one of the parts, you can now drag it around the bed (when using this metho

USING THE SHELL SELECTOR TOOLThe Shell Selector tool is used to select which Print Jets print which parts of a multi-material part/multiple parts on a

Do not change cartridge color or material type during printing; doing so may damage the CubeX.Please ensure you have followed all CubeX setup instruct

Before you attempt to remove your creation from the Print Pad, please ensure that the CubeX has nished printing and that the Print Pad has moved to t

REMOVING SUPPORTS WITH THE ULTRASONIC SUPPORT REMOVAL TANKHOT WATER METHODCaustic soda can burn if handled improperly. Never handle caustic soda witho

IMPORTANT SAFETY INFORMATIONSafety symbols and denitions...

CAUSTIC SODA METHODCaustic soda can burn if handled improperly. Never handle caustic soda without using all of the supplied Personal Protective Equipm

RESTORING ROUGHNESS TO THE PRINT PADTo restore roughness to the Print Pad, run the sandpaper included in your toolkit diagonally across the bed corner

FINE-TUNING YOUR PRINT PAD1. Re-install the Print Pad before ne tuning.2. Use the Up and Down arrows to reduce the gap between the print jet and Pr

SETTING THE PRINT JET GAPAfter leveling the Print Pad, the print jet must be set to the correct height to ensure that the rst printed layer sticks pr

5. Plug your CubeX into the computer using the PC connection USB port (Fig. 85 & 86). Navigate to the settings tab on the CubeX software and pres

SETTING THE CUBEX PRINT JET OFFSETSCAUTION: Do not use the offset menu unless you have been advised to do so by Cubify Support, as changes to this may

25PRINT JET 3 X OFFSET Compare the lines on “X scale 1” and “X scale 3” to nd the ones that most accurately line up. Because variation is

CUBEX MAINTENANCERestoring roughness to the Print Pad...20Leveli

SAFETY SYMBOLS AND DEFINITIONSSAFETY GUIDELINES• Follow all safety rules in this section and observe all cautions and warnings in this guide.• Do no

Glow-in-the-dark Neon Green* Natural is only available in PLA plastic, not ABS.Neon OrangeGlow-in-the-dark Neon BlueTanWhiteYellowBlackNeon GreenSilve

5REQUIREMENTS FOR YOUR CUBEXWeight and dimensions:• 515mm (w) x 515mm (l) x 598mm (h) (20 ¼” x 20 ¼” x 23 ½” inches)• 36kg (79 lbs)• 37kg (81.5 lbs

6UNPACKING YOUR CUBEX (FOLLOW UNPACKING GUIDE)1. Open the box and take out the top lid of the CubeX, it’s between two layers of foam. (Fig. 1)2. Wit

7LINK YOUR CUBEX TO YOUR CUBIFY ACCOUNTCreating an account on Cubify.com is easy and gives you access to all of the great designs and collections that

83. Select to the ‘Home’ option on the main menu.4. Click the ‘Home’ button. This will move the print jet carriage to each of the home switches, che